Xtrabadgeâ„¢ Epaulettes

Embroidered or Woven Epaulettes for Security Uniforms

Xtrabadge Embroidered or Woven Epaulettes

Epaulettes are most often seen on Uniformed staff such as security personel and we offer your logo applied to these as either embroidery or woven.

A woven epaulette features fine detail and the logo is intricate to the fabric. Woven epaulattes look crips and professional and minimum order quantities start at 50pairs. Embroidery is applied to the epaulette during the manufacturing process, creates a slightly more 3D finish and can sometimes be used where smaller quantities are required.

Read more about  the Features and Benefits of the Xtrabadge below.

Heat Applied Backings

The Heat Applied backings on the Xtrabadge Embroidered badges can be applied to your garments using a standard industrial heat press. We recommend a setting of 180 degrees with firm pressure. Simply align the badge in the chosen location, tack lightly from the front for 3-4 seconds or use a spray badge location adhesive. Then reverse the garment and apply the heat from the back of the garment for 15-20seconds. Leave to cool before folding.

Intricate Detail & Shapes

Using modern embroidery technology, we can create intricate shapes rather than the traditional rectangles, squares and circles typically available in embroidered badges.

And with lettering possible down to 4mm and fine stitch lines, you can be sure of acheiving a fantastic result for your client.

Product Features

  • Woven or Embroidered
  • High definition
  • Overlocked Edges
  • Choice of fabric colours
  • Attention to logo detail
  • Low minimum order quantities
  • 100’s of Thread colours
Share This