Xtrabadge™ Applique

Embroidered Badges with Applique backgrounds

Xtrabadge Applique Badges


Where a design is larger, we may suggest using the Xtrabadge Applique Badges which utilise fabric in the background of the logo to reduce the number of stitches. The background fabric will match to your brand colourways and it traditionally created using a Cotton Twill or Polyester fabric.

Choose from either a Traditional Merrowed (Overlocked) edge or Heat Cut edges if an intricate shape is required.

Read more about  the Features and Benefits of the Xtrabadge below.

Heat Applied Backings

The Heat Applied backings on the Xtrabadge Embroidered badges can be applied to your garments using a standard industrial heat press. We recommend a setting of 180 degrees with firm pressure. Simply align the badge in the chosen location, tack lightly from the front for 3-4 seconds or use a spray badge location adhesive. Then reverse the garment and apply the heat from the back of the garment for 15-20seconds. Leave to cool before folding.

Intricate Detail & Shapes

Using modern embroidery technology, we can create intricate shapes rather than the traditional rectangles, squares and circles typically available in embroidered badges.

And with lettering possible down to 4mm and fine stitch lines, you can be sure of acheiving a fantastic result for your client.

Product Features

  • Applique fabric backgrounds
  • Suitable for larger designs
  • Heat Applied backings
  • Apply with your heat press
  • Traditional shapes & designs
  • Low minimum order quantities
  • 100’s of Thread colours
Share This